Install Kobler Quartz Floor KP440

Step 1 – Prepare tools and flooring materials: You need to prepare all the necessary tools to install quartz floors such as a rubber hammer, cutter, and ruler,…

Step 2 – Cleaning the floor surface: This is quite an important step, affecting the quality and durability of the floor after installation. You need to vacuum, clean and dry the floor surface.

Step 3 – Install quartz floor: Fix the first plank close to the wall, ensure accuracy, then install the next floor panels. During construction, use a hammer to gently tap the floor joints to fit closer together.

When laying a floor with the locking system, it is necessary to follow the following 2 stages:

Stage 1: Assembly

Bring the floor panel close to the edge of the wall and 5mm away from the edge of the wall

Cut the plank into 2/3 and 1/3, then install the newly cut 2/3 board right in the position of the second row to be installed.

In the third row, place 1/3 of the floorboard in the position to be constructed

Do this one after another until the project is completed

All floorboards will be connected by an advanced locking system. After the planks are in place, absolutely do not use a hammer to tap on the top of the floorboard because it may affect the quality.

Stage 2: Install skirting, reducer and T-molding

At the corner and base of the wall, install flooring accessories to complete the entire floor, bringing high aesthetic beauty to the project.

Use additional nails or glue during the installation. For plaster walls, glue is the best choice.

Preserving Quartz Floor KP440

How to preserve KP440 Quartz Floor, specifically:

• Sweep the floor every day to remove dirt and impurities from the floor surface
• Use a soft and clean rag to clean the floor regularly
• Avoid spilling water on the floor and avoid applying too much force to the floor

If you have any questions or need further information about Kobler Quartz Floor KP440, please contact the hotline 0962.999.159 for the fastest support.